Exhibiting at PMEC India 2026? Design your stall here
PMEC India 2026 is on 24 to 26 Nov 2026 at India Expo Centre & Mart, Greater Noida. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
5 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · This week
To fabricator
Export renders and OBJ or FBX files.
- 05 · 22 to 23 Nov
Build-up
Your builder installs at India Expo Mart.
- 06 · 24 to 26 Nov
Show days
Doors open.
Less than eight weeks to go: start now, so the organiser has time to approve your design before build-up. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a multi-sector stall, from one brief.
-
01
One clear line about what you do, with the counter to one side.
-
02
Your hero product on the corner, where two aisles see it.
-
03
A central storage core with your brand on every side.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
PMEC India 2026 at a glance
- Dates24 to 26 Nov 2026
- CityGreater Noida, India
- SectorMulti-sector
- OrganiserInforma Markets in India
- Edition19th edition (with CPHI India)
- Have your design ready byAs soon as you can. The show is less than 8 weeks away
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About PMEC India 2026
PMEC India is a pharmaceutical machinery and manufacturing technology show held alongside CPHI India, with one badge covering both. In 2026 PMEC is at India Expo Mart while CPHI India runs at Yashobhoomi from 23 to 25 November.
Who exhibits
Makers of pharma processing, filling, automation and inspection machinery, cleanroom and HVAC systems, primary and secondary packaging, and lab and analytical equipment.
Who visits
Engineering and operations professionals from pharmaceutical manufacturing.
Scale: 50,000+ visitors, 2,000+ exhibiting companies and 120,000+ sq m (2025 edition, CPHI and PMEC India combined, per organiser)
Sources: cphi.com, themachinemaker.com
Stall sizes
Which stall size to book for PMEC India 2026
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for multi-sector exhibitors
- Lead with one clear line about what you do. Multi-sector halls are busy and visitors skim.
- Keep the entrance open and the counter to one side.
- Plan storage for brochures, samples and bags. It always runs out.
Check the PMEC India 2026 exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at India Expo Mart
Next on the same floor.
FAQ
Stall questions for this show.
PMEC India 2026 runs 24 to 26 Nov 2026 at India Expo Centre & Mart, Greater Noida. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At India Expo Centre & Mart in Greater Noida.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (now), so there's time for the organiser's approval and for fabrication.
