6×3 m stall design
6×3 m is 18 sq m, about 20×10 ft. Enough room to split the stall into a display zone and a small meeting corner.
What fits in a 6×3 m stall
- Full-length back wall with graphics or an LED screen
- Fascia
- Reception counter
- Product display zone
- Small meeting table with 2–3 chairs
- Lockable store (often 1×1 m)
Fabricator's tip: Put the store at one end so it doubles as a side wall for branding.
Open sides
A 6×3 m stall usually has one or two open sides. More open sides means more faces to design and brand, and usually a higher build cost.
Design it in 3D
- Open Boothlane by EaseMyExpo and enter the size (6×3 m) and open sides.
- Draw the walls, fascia, counter and storage — or upload the client's reference photo.
- Export renders for the client and OBJ/FBX files for production.
Start a 6×3 m stall
Runs in your browser. Imports from 3ds Max. Exports OBJ & FBX.
Start designingFrequently asked questions
How big is a 6×3 m stall?
6×3 m is 18 sq m, about 20×10 ft.
What can fit in a 6×3 m stall?
Typically: Full-length back wall with graphics or an LED screen; Fascia; Reception counter; Product display zone; Small meeting table with 2–3 chairs; Lockable store (often 1×1 m).
How do I design a 6×3 m stall in 3D?
Enter the size and open sides in Boothlane by EaseMyExpo, draw or prompt the design, then export renders and OBJ/FBX files. It runs in a browser with no download.