Skip to content
India · 3×3 m · about 10×10 ft

3×3 m stall design

3×3 m is 9 sq m, about 10×10 ft. The most common stall size at Indian trade shows. Many shows sell it as a shell-scheme package; check your exhibitor manual before designing a custom build.

about 10×10 ftAn exhibition stall designed in 3D in Boothlane by EaseMyExpo

3×3 m stall

9 m² · about 10×10 ft

What fits in a 3×3 m stall

  • Branded back wall with backlit or vinyl graphics
  • Fascia with company name
  • Reception counter with storage below
  • One display shelf or screen
  • 2 bar stools

Fabricator's tip: Keep the counter at the aisle edge and the back wall clear for one big message - visitors decide in a few seconds as they walk past.

3×3 m, one open side shown. 1 square = 1×1 m.

Open sides

A 3×3 m stall usually has one or two open sides (inline or corner). More open sides means more faces to design and brand, and usually a higher build cost.

What does a 3×3 stall design cost?

  • ₹2,000Freelance design with renderIndia, 3×3 m stall
  • ₹2,000Working drawingsIndia, on top of the design
  • $60–80Small stall design with renderAbroad, plus about $60 for drawings

In India, a freelance design for a 3×3 m stall typically costs about ₹2,000, with working drawings about ₹2,000 more. Abroad, agencies typically pay freelancers $60–80 for a small stall design with render, plus about $60 for working drawings.

Full cost guide

Design it in 3D

  1. Open Boothlane by EaseMyExpo and enter the size (3×3 m) and open sides.
  2. Draw the walls, fascia, counter and storage - or upload the client's reference photo.
  3. Export renders for the client and OBJ/FBX files for production.

Other stall sizes

  • 6×3 m stall

    18 m² · about 20×10 ft

    Enough room to split the stall into a display zone and a small meeting corner.

    6×3 m stall design
  • 6×6 m stall

    36 m² · about 20×20 ft

    Usually sold as raw (bare) space, so the full stall is custom-built.

    6×6 m stall design
  • 9×6 m stall

    54 m² · about 30×20 ft

    A flagship-size stall.

    9×6 m stall design
  • Island stall

    Any size · open on all four sides

    Island stalls are open on all four sides and are usually among the largest stalls in a hall.

    Island stall design

FAQ

Good questions, answered.

  • 3×3 m is 9 sq m, about 10×10 ft.

  • Typically: Branded back wall with backlit or vinyl graphics; Fascia with company name; Reception counter with storage below; One display shelf or screen; 2 bar stools.

  • Enter the size and open sides in Boothlane by EaseMyExpo, draw or prompt the design, then export renders and OBJ/FBX files. It runs in a browser with no download.

Let your next booth design itself

Start designing