Skip to content
17 to 19 Dec 2026India Expo Mart, Greater NoidaEnergy, power, environment

Exhibiting at Waste 2 Wealth India Expo 2026? Design your stall here

Waste 2 Wealth India Expo 2026 is on 17 to 19 Dec 2026 at India Expo Centre & Mart, Greater Noida. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.

India Expo Mart · Illustrative
AISLE6.0 m3.0 mYour stall
Stall size
Open sides
Design a 6 × 3 m stall, 2 open in Boothlane

Road to show day

28 days to doors open. Here’s the climb.

  1. 01 · Today

    Brief

    Set your stall size and open sides.

  2. 02 · +1 min

    Concepts

    Photoreal concepts to compare, in under a minute.

  3. 03 · +2 days

    Client sign-off

    Share a walk-through link for comments.

  4. 04 · This week

    To fabricator

    Export renders and OBJ or FBX files.

  5. 05 · 15 to 16 Dec

    Build-up

    Your builder installs at India Expo Mart.

  6. 06 · 17 to 19 Dec

    Show days

    Doors open.

Less than eight weeks to go: start now, so the organiser has time to approve your design before build-up. Build-up dates are typical; your exhibitor manual has the exact ones.

Example concepts

Three directions for an energy and environment stall, from one brief.

  • 01

    Product at scale

    6 × 6 m · 3 open

    A panel, cell or cut-away model at real size in the middle of the stand.

  • 02

    Systems wall

    6 × 3 m · 1 open

    Large screens for systems too big to bring into the hall.

  • 03

    Reusable island

    6 × 6 m · 4 open

    A modular structure and recyclable graphics, and a sign that says so.

Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.

The show

Waste 2 Wealth India Expo 2026 at a glance

Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.

About the show

About Waste 2 Wealth India Expo 2026

Waste 2 Wealth India Expo 2026 is a energy, power, environment trade show at India Expo Centre & Mart, Greater Noida. Check the exhibitor profile, floor plan and stall rules in the organiser's exhibitor manual before you design.

Stall sizes

Which stall size to book for Waste 2 Wealth India Expo 2026

Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:

  • 3×3 m stall

    One branded back wall, a counter and a display unit.

    3×3 m stall guide
  • 6×3 m stall

    Adds a demo or product zone next to the counter.

    6×3 m stall guide
  • 6×6 m stall

    Usually open on two or three sides, with a small meeting area and storage.

    6×6 m stall guide
  • 9×6 m stall

    Separate product zones, a meeting room and branding seen from several aisles.

    9×6 m stall guide

All stall sizes · What stall design costs

Design tips

Stall design tips for energy and environment exhibitors

  1. Show the product at real scale where you can, such as a panel, a cell or a cut-away model.
  2. Use screens and graphics for systems too large to bring into the hall.
  3. Reusable structures and recyclable graphics fit this audience. Say so on the stand.

Check the Waste 2 Wealth India Expo 2026 exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.

Also at India Expo Mart

Next on the same floor.

All Greater Noida shows

FAQ

Stall questions for this show.

  • Waste 2 Wealth India Expo 2026 runs 17 to 19 Dec 2026 at India Expo Centre & Mart, Greater Noida. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.

  • At India Expo Centre & Mart in Greater Noida.

  • A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.

  • Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.

  • About 8 weeks before the show (now), so there's time for the organiser's approval and for fabrication.

See your stall before anyone builds it

Start designing