Exhibiting at PU Tech 2027? Design your stall here
PU Tech is on 20 to 22 Jan 2027 at India Expo Centre & Mart, Greater Noida. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
62 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 25 Nov
To fabricator
Export renders and OBJ or FBX files.
- 05 · 18 to 19 Jan
Build-up
Your builder installs at India Expo Mart.
- 06 · 20 to 22 Jan
Show days
Doors open.
Have your design ready by 25 Nov 2026, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a multi-sector stall, from one brief.
-
01
One clear line about what you do, with the counter to one side.
-
02
Your hero product on the corner, where two aisles see it.
-
03
A central storage core with your brand on every side.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
PU Tech at a glance
- Dates20 to 22 Jan 2027
- CityGreater Noida, India
- SectorMulti-sector
- OrganiserIndian Polyurethane Association (IPUA)
- Edition8th
- Have your design ready by25 Nov 2026
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About PU Tech
PU Tech India is a biennial exhibition and technical conference for the polyurethane sector, covering flexible and rigid foams, coatings, adhesives, sealants and elastomers.
Who exhibits
Polyurethane raw material suppliers, processing equipment makers and end-product manufacturers.
Who visits
Professionals from across the materials and manufacturing value chain.
Sources: chemxplore.com
Stall sizes
Which stall size to book for PU Tech
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for multi-sector exhibitors
- Lead with one clear line about what you do. Multi-sector halls are busy and visitors skim.
- Keep the entrance open and the counter to one side.
- Plan storage for brochures, samples and bags. It always runs out.
Check the PU Tech exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at India Expo Mart
Next on the same floor.
FAQ
Stall questions for this show.
PU Tech runs 20 to 22 Jan 2027 at India Expo Centre & Mart, Greater Noida. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At India Expo Centre & Mart in Greater Noida.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (25 Nov 2026), so there's time for the organiser's approval and for fabrication.
