Exhibiting at India ITME 2026? Design your stall here
India ITME 2026 is on 4 to 9 Dec 2026 at India Expo Centre & Mart, Greater Noida. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
15 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · This week
To fabricator
Export renders and OBJ or FBX files.
- 05 · 2 to 3 Dec
Build-up
Your builder installs at India Expo Mart.
- 06 · 4 Dec
Show days
Doors open.
Less than eight weeks to go: start now, so the organiser has time to approve your design before build-up. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a machinery and industrial stall, from one brief.
-
01
Live machines on a raised platform, with safe space marked by flooring and light.
-
02
Equipment in the round and a raised header that reads above the machines.
-
03
One hero machine up front and a quiet table for talking numbers.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
India ITME 2026 at a glance
- Dates4 to 9 Dec 2026
- CityGreater Noida, India
- SectorTextile machinery
- OrganiserIndia ITME Society
- Have your design ready byAs soon as you can. The show is less than 8 weeks away
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About India ITME 2026
India ITME is an exhibition for the textile and textile engineering industry. The venue describes it as the largest event in this segment.
Scale: 1,800+ exhibitors across 20 chapters and 1,50,000+ visitors expected over six days (2026 edition, per IEML venue listing)
Sources: indiaexpomart.com
Stall sizes
Which stall size to book for India ITME 2026
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for machinery and industrial exhibitors
- Plan floor loading, power and compressed air for live machines first. Heavy exhibits usually go in before the stand is built around them.
- Mark safe space around running machines with flooring and lighting rather than barriers, so visitors can still get close.
- Put the brand on a raised header or hanging sign so it reads above large equipment.
- Add a quiet meeting corner. Capital equipment buyers want to sit down and talk numbers.
Check the India ITME 2026 exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at India Expo Mart
Next on the same floor.
FAQ
Stall questions for this show.
India ITME 2026 runs 4 to 9 Dec 2026 at India Expo Centre & Mart, Greater Noida. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At India Expo Centre & Mart in Greater Noida.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (now), so there's time for the organiser's approval and for fabrication.
