Skip to content
13 to 15 Mar 2027Bharat Mandapam, New DelhiHealthcare, pharma, life sciences

Exhibiting at INOPTICS 2027? Design your stall here

INOPTICS 2027 is on 13 to 15 Mar 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.

Bharat Mandapam · Illustrative
AISLE6.0 m3.0 mYour stall
Stall size
Open sides
Design a 6 × 3 m stall, 2 open in Boothlane

Road to show day

114 days to doors open. Here’s the climb.

  1. 01 · Today

    Brief

    Set your stall size and open sides.

  2. 02 · +1 min

    Concepts

    Photoreal concepts to compare, in under a minute.

  3. 03 · +2 days

    Client sign-off

    Share a walk-through link for comments.

  4. 04 · By 16 Jan

    To fabricator

    Export renders and OBJ or FBX files.

  5. 05 · 11 to 12 Mar

    Build-up

    Your builder installs at Bharat Mandapam.

  6. 06 · 13 to 15 Mar

    Show days

    Doors open.

Have your design ready by 16 Jan 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.

Example concepts

Three directions for a healthcare and pharma stall, from one brief.

  • 01

    Clean counter

    6 × 3 m · 1 open

    Bright finishes, product information at eye level and one clear counter.

  • 02

    Device island

    6 × 6 m · 4 open

    Devices shown in use on low plinths, readable from every aisle.

  • 03

    Private consult

    9 × 6 m · 2 open

    An enclosed room for hospital buyers behind an open display front.

Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.

The show

INOPTICS 2027 at a glance

Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.

About the show

About INOPTICS 2027

INOPTICS 2027 is a healthcare, pharma, life sciences trade show at Bharat Mandapam (Pragati Maidan), New Delhi. Check the exhibitor profile, floor plan and stall rules in the organiser's exhibitor manual before you design.

Stall sizes

Which stall size to book for INOPTICS 2027

Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:

  • 3×3 m stall

    One branded back wall, a counter and a display unit.

    3×3 m stall guide
  • 6×3 m stall

    Adds a demo or product zone next to the counter.

    6×3 m stall guide
  • 6×6 m stall

    Usually open on two or three sides, with a small meeting area and storage.

    6×6 m stall guide
  • 9×6 m stall

    Separate product zones, a meeting room and branding seen from several aisles.

    9×6 m stall guide

All stall sizes · What stall design costs

Design tips

Stall design tips for healthcare and pharma exhibitors

  1. Use clean, bright finishes and clear product information. Visitors read before they talk.
  2. Add an enclosed meeting space; hospital buyers and distributors expect privacy.
  3. Use screens to show devices in use where live demonstrations aren't allowed, and check the organiser's rules.

Check the INOPTICS 2027 exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.

Also at Bharat Mandapam

Next on the same floor.

All New Delhi shows

FAQ

Stall questions for this show.

  • INOPTICS 2027 runs 13 to 15 Mar 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.

  • At Bharat Mandapam (Pragati Maidan) in New Delhi.

  • A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.

  • Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.

  • About 8 weeks before the show (16 Jan 2027), so there's time for the organiser's approval and for fabrication.

See your stall before anyone builds it

Start designing