Exhibiting at Routes Asia 2027? Design your stall here
Routes Asia is on 16 to 18 Mar 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
117 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 19 Jan
To fabricator
Export renders and OBJ or FBX files.
- 05 · 14 to 15 Mar
Build-up
Your builder installs at Bharat Mandapam.
- 06 · 16 to 18 Mar
Show days
Doors open.
Have your design ready by 19 Jan 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for an automotive and transport stall, from one brief.
-
01
The hero vehicle raised on a platform above the crowd.
-
02
Tracking and fleet software on large screens beside the product.
-
03
A seated area for fleet buyers next to one showcase vehicle.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
Routes Asia at a glance
- Dates16 to 18 Mar 2027
- SectorAutomotive, transport, logistics
- OrganiserRoutes (2027 edition hosted by Airports Authority of India)
- Edition23rd edition
- Have your design ready by19 Jan 2027
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About Routes Asia
Routes Asia is an air service development event where airlines, airports and tourism authorities in the Asia-Pacific region meet to plan future route services. The 2027 edition in New Delhi is hosted by the Airports Authority of India.
Who exhibits
Exhibitors are airports, tourism authorities and other companies in the aviation and route development community, using hosted networking stands and shell scheme stands.
Who visits
Attendees are airlines, airports, tourism authorities and other aviation stakeholders.
Scale: Over 360 organisations expected (2027 edition, per organiser)
Sources: routesonline.com, routesonline.com, ttgasia.com
Stall sizes
Which stall size to book for Routes Asia
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for automotive and transport exhibitors
- Plan vehicle entry early: door widths, turning space and floor load decide where the hero product can go.
- A platform or turntable lifts the hero vehicle above the crowd.
- Use large screens for fleet, tracking or logistics software that can't be shown physically.
Check the Routes Asia exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at Bharat Mandapam
Next on the same floor.
FAQ
Stall questions for this show.
Routes Asia runs 16 to 18 Mar 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At Bharat Mandapam (Pragati Maidan) in New Delhi.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (19 Jan 2027), so there's time for the organiser's approval and for fabrication.
