Exhibiting at TOPACK 2027? Design your stall here
TOPACK 2027 is on 10 to 12 Jun 2027 at CODISSIA Trade Fair Complex, Coimbatore. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
203 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 15 Apr
To fabricator
Export renders and OBJ or FBX files.
- 05 · 8 to 9 Jun
Build-up
Your builder installs at CODISSIA.
- 06 · 10 to 12 Jun
Show days
Doors open.
Have your design ready by 15 Apr 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a packaging and printing stall, from one brief.
-
01
Finished packs on shelves at hand height, not just materials.
-
02
A running machine with safe space and power planned around it.
-
03
Samples to pick up on the corner, a table for orders behind.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
TOPACK 2027 at a glance
- Dates10 to 12 Jun 2027
- CityCoimbatore, India
- SectorPackaging, printing, paper
- Official websitetopack.in
- Have your design ready by15 Apr 2027
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About TOPACK 2027
TOPACK 2027 is a packaging, printing, paper trade show at CODISSIA Trade Fair Complex, Coimbatore. Check the exhibitor profile, floor plan and stall rules in the organiser's exhibitor manual before you design.
Stall sizes
Which stall size to book for TOPACK 2027
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for packaging and printing exhibitors
- Show finished packs, not just materials. Buyers want to see the end result.
- If machines run live, plan power, noise and safety space around them.
- Put samples on shelves at hand height so visitors pick them up.
Check the TOPACK 2027 exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at CODISSIA
Next on the same floor.
FAQ
Stall questions for this show.
TOPACK 2027 runs 10 to 12 Jun 2027 at CODISSIA Trade Fair Complex, Coimbatore. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At CODISSIA Trade Fair Complex in Coimbatore.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (15 Apr 2027), so there's time for the organiser's approval and for fabrication.
