Exhibiting at RailTrans Expo 2027? Design your stall here
RailTrans Expo 2027 is on 1 to 3 Jul 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
224 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 6 May
To fabricator
Export renders and OBJ or FBX files.
- 05 · 29 to 30 Jun
Build-up
Your builder installs at Bharat Mandapam.
- 06 · 1 to 3 Jul
Show days
Doors open.
Have your design ready by 6 May 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for an automotive and transport stall, from one brief.
-
01
The hero vehicle raised on a platform above the crowd.
-
02
Tracking and fleet software on large screens beside the product.
-
03
A seated area for fleet buyers next to one showcase vehicle.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
RailTrans Expo 2027 at a glance
- Dates1 to 3 Jul 2027
- SectorAutomotive, transport, logistics
- Official websiterailtransexpo.com
- Have your design ready by6 May 2027
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About RailTrans Expo 2027
RailTrans Expo 2027 is a automotive, transport, logistics trade show at Bharat Mandapam (Pragati Maidan), New Delhi. Check the exhibitor profile, floor plan and stall rules in the organiser's exhibitor manual before you design.
Stall sizes
Which stall size to book for RailTrans Expo 2027
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for automotive and transport exhibitors
- Plan vehicle entry early: door widths, turning space and floor load decide where the hero product can go.
- A platform or turntable lifts the hero vehicle above the crowd.
- Use large screens for fleet, tracking or logistics software that can't be shown physically.
Check the RailTrans Expo 2027 exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at Bharat Mandapam
Next on the same floor.
FAQ
Stall questions for this show.
RailTrans Expo 2027 runs 1 to 3 Jul 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At Bharat Mandapam (Pragati Maidan) in New Delhi.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (6 May 2027), so there's time for the organiser's approval and for fabrication.
