Skip to content
20 to 23 May 2027Bharat Mandapam, New DelhiMachinery, industrial, manufacturing

Exhibiting at Plastasia 2027? Design your stall here

Plastasia is on 20 to 23 May 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.

Bharat Mandapam · Illustrative
AISLE6.0 m3.0 mYour stall
Stall size
Open sides
Design a 6 × 3 m stall, 2 open in Boothlane

Road to show day

182 days to doors open. Here’s the climb.

  1. 01 · Today

    Brief

    Set your stall size and open sides.

  2. 02 · +1 min

    Concepts

    Photoreal concepts to compare, in under a minute.

  3. 03 · +2 days

    Client sign-off

    Share a walk-through link for comments.

  4. 04 · By 25 Mar

    To fabricator

    Export renders and OBJ or FBX files.

  5. 05 · 18 to 19 May

    Build-up

    Your builder installs at Bharat Mandapam.

  6. 06 · 20 to 23 May

    Show days

    Doors open.

Have your design ready by 25 Mar 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.

Example concepts

Three directions for a machinery and industrial stall, from one brief.

  • 01

    Machine floor

    9 × 6 m · 3 open

    Live machines on a raised platform, with safe space marked by flooring and light.

  • 02

    Open showroom

    9 × 9 m · 4 open

    Equipment in the round and a raised header that reads above the machines.

  • 03

    Meeting corner

    6 × 6 m · 2 open

    One hero machine up front and a quiet table for talking numbers.

Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.

The show

Plastasia at a glance

Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.

About the show

About Plastasia

Plastasia is a machinery, industrial, manufacturing trade show at Bharat Mandapam (Pragati Maidan), New Delhi. Check the exhibitor profile, floor plan and stall rules in the organiser's exhibitor manual before you design.

Stall sizes

Which stall size to book for Plastasia

Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:

  • 3×3 m stall

    One branded back wall, a counter and a display unit.

    3×3 m stall guide
  • 6×3 m stall

    Adds a demo or product zone next to the counter.

    6×3 m stall guide
  • 6×6 m stall

    Usually open on two or three sides, with a small meeting area and storage.

    6×6 m stall guide
  • 9×6 m stall

    Separate product zones, a meeting room and branding seen from several aisles.

    9×6 m stall guide

All stall sizes · What stall design costs

Design tips

Stall design tips for machinery and industrial exhibitors

  1. Plan floor loading, power and compressed air for live machines first. Heavy exhibits usually go in before the stand is built around them.
  2. Mark safe space around running machines with flooring and lighting rather than barriers, so visitors can still get close.
  3. Put the brand on a raised header or hanging sign so it reads above large equipment.
  4. Add a quiet meeting corner. Capital equipment buyers want to sit down and talk numbers.

Check the Plastasia exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.

Also at Bharat Mandapam

Next on the same floor.

All New Delhi shows

FAQ

Stall questions for this show.

  • Plastasia runs 20 to 23 May 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.

  • At Bharat Mandapam (Pragati Maidan) in New Delhi.

  • A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.

  • Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.

  • About 8 weeks before the show (25 Mar 2027), so there's time for the organiser's approval and for fabrication.

See your stall before anyone builds it

Start designing