Exhibiting at PaintIndia 2027? Design your stall here
PaintIndia is on 12 to 13 Mar 2027 at Yashobhoomi (India International Convention & Expo Centre), New Delhi. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
113 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 15 Jan
To fabricator
Export renders and OBJ or FBX files.
- 05 · 10 to 11 Mar
Build-up
Your builder installs at Yashobhoomi.
- 06 · 12 to 13 Mar
Show days
Doors open.
Have your design ready by 15 Jan 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a construction and interiors stall, from one brief.
-
01
Walls, floor and fittings built from your own products.
-
02
Finishes on full-height mock-up walls, lit warm and neutral.
-
03
A finished room visitors walk into, with samples to hand.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
PaintIndia at a glance
- Dates12 to 13 Mar 2027
- SectorConstruction, building, interiors
- OrganiserColour Publications Pvt Ltd
- Have your design ready by15 Jan 2027
Dates and venue as listed in venue and organiser calendars. 2027 dates and venue were not confirmed from the organiser; the 2025 edition was held 30 to 31 January 2025 at IICC Yashobhoomi, New Delhi. Confirm with the organiser before you book space or travel.
About the show
About PaintIndia
PAINTINDIA is an exhibition and congress for the paints and coatings industry, held since 1993. The American Coatings Association describes it as the region's leading show for paints, coatings and allied industries.
Who exhibits
Indian and international suppliers of paints and coatings, printing inks, adhesives and sealants, construction chemicals and related raw materials.
Sources: paint.org, european-coatings.com, pcimag.com
Stall sizes
Which stall size to book for PaintIndia
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for construction and interiors exhibitors
- Build the stand from your own products, such as flooring, panels and fittings, so it works as a showroom.
- Show products installed on mock-up walls and corners, not only on shelves.
- Plan the lighting for your finishes: warm and neutral zones show materials honestly.
Check the PaintIndia exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at Yashobhoomi
Next on the same floor.
FAQ
Stall questions for this show.
PaintIndia runs 12 to 13 Mar 2027 at Yashobhoomi (India International Convention & Expo Centre), New Delhi. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At Yashobhoomi (India International Convention & Expo Centre) in New Delhi.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (15 Jan 2027), so there's time for the organiser's approval and for fabrication.
