Skip to content
10 to 12 Sep 2027Chennai Trade Centre, ChennaiAutomotive, transport, logistics

Exhibiting at LOGMAT India 2027? Design your stall here

LOGMAT India is on 10 to 12 Sep 2027 at Chennai Trade Centre, Chennai. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.

Chennai Trade Centre · Illustrative
AISLE6.0 m3.0 mYour stall
Stall size
Open sides
Design a 6 × 3 m stall, 2 open in Boothlane

Road to show day

295 days to doors open. Here’s the climb.

  1. 01 · Today

    Brief

    Set your stall size and open sides.

  2. 02 · +1 min

    Concepts

    Photoreal concepts to compare, in under a minute.

  3. 03 · +2 days

    Client sign-off

    Share a walk-through link for comments.

  4. 04 · By 16 Jul

    To fabricator

    Export renders and OBJ or FBX files.

  5. 05 · 8 to 9 Sep

    Build-up

    Your builder installs at Chennai Trade Centre.

  6. 06 · 10 to 12 Sep

    Show days

    Doors open.

Have your design ready by 16 Jul 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.

Example concepts

Three directions for an automotive and transport stall, from one brief.

  • 01

    Hero platform

    9 × 9 m · 4 open

    The hero vehicle raised on a platform above the crowd.

  • 02

    Fleet screens

    9 × 6 m · 3 open

    Tracking and fleet software on large screens beside the product.

  • 03

    Driver lounge

    6 × 6 m · 2 open

    A seated area for fleet buyers next to one showcase vehicle.

Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.

The show

LOGMAT India at a glance

Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.

About the show

About LOGMAT India

LOGMAT India is a automotive, transport, logistics trade show at Chennai Trade Centre, Chennai. Check the exhibitor profile, floor plan and stall rules in the organiser's exhibitor manual before you design.

Stall sizes

Which stall size to book for LOGMAT India

Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:

  • 3×3 m stall

    One branded back wall, a counter and a display unit.

    3×3 m stall guide
  • 6×3 m stall

    Adds a demo or product zone next to the counter.

    6×3 m stall guide
  • 6×6 m stall

    Usually open on two or three sides, with a small meeting area and storage.

    6×6 m stall guide
  • 9×6 m stall

    Separate product zones, a meeting room and branding seen from several aisles.

    9×6 m stall guide

All stall sizes · What stall design costs

Design tips

Stall design tips for automotive and transport exhibitors

  1. Plan vehicle entry early: door widths, turning space and floor load decide where the hero product can go.
  2. A platform or turntable lifts the hero vehicle above the crowd.
  3. Use large screens for fleet, tracking or logistics software that can't be shown physically.

Check the LOGMAT India exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.

Also in Chennai

Next in Chennai.

All Chennai shows

FAQ

Stall questions for this show.

  • LOGMAT India runs 10 to 12 Sep 2027 at Chennai Trade Centre, Chennai. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.

  • At Chennai Trade Centre in Chennai.

  • A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.

  • Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.

  • About 8 weeks before the show (16 Jul 2027), so there's time for the organiser's approval and for fabrication.

See your stall before anyone builds it

Start designing