Skip to content
10 to 11 Jun 2027Bharat Mandapam, New DelhiConstruction, building, interiors

Exhibiting at FSD Expo 2027 (Fire, Safety & Disaster)? Design your stall here

FSD Expo 2027 (Fire, Safety & Disaster) is on 10 to 11 Jun 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.

Bharat Mandapam · Illustrative
AISLE6.0 m3.0 mYour stall
Stall size
Open sides
Design a 6 × 3 m stall, 2 open in Boothlane

Road to show day

203 days to doors open. Here’s the climb.

  1. 01 · Today

    Brief

    Set your stall size and open sides.

  2. 02 · +1 min

    Concepts

    Photoreal concepts to compare, in under a minute.

  3. 03 · +2 days

    Client sign-off

    Share a walk-through link for comments.

  4. 04 · By 15 Apr

    To fabricator

    Export renders and OBJ or FBX files.

  5. 05 · 8 to 9 Jun

    Build-up

    Your builder installs at Bharat Mandapam.

  6. 06 · 10 to 11 Jun

    Show days

    Doors open.

Have your design ready by 15 Apr 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.

Example concepts

Three directions for a construction and interiors stall, from one brief.

  • 01

    Showroom shell

    6 × 6 m · 2 open

    Walls, floor and fittings built from your own products.

  • 02

    Material wall

    9 × 3 m · 1 open

    Finishes on full-height mock-up walls, lit warm and neutral.

  • 03

    Room set

    9 × 6 m · 3 open

    A finished room visitors walk into, with samples to hand.

Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.

The show

FSD Expo 2027 (Fire, Safety & Disaster) at a glance

Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.

About the show

About FSD Expo 2027 (Fire, Safety & Disaster)

FSD Expo 2027 (Fire, Safety & Disaster) is a construction, building, interiors trade show at Bharat Mandapam (Pragati Maidan), New Delhi. Check the exhibitor profile, floor plan and stall rules in the organiser's exhibitor manual before you design.

Stall sizes

Which stall size to book for FSD Expo 2027 (Fire, Safety & Disaster)

Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:

  • 3×3 m stall

    One branded back wall, a counter and a display unit.

    3×3 m stall guide
  • 6×3 m stall

    Adds a demo or product zone next to the counter.

    6×3 m stall guide
  • 6×6 m stall

    Usually open on two or three sides, with a small meeting area and storage.

    6×6 m stall guide
  • 9×6 m stall

    Separate product zones, a meeting room and branding seen from several aisles.

    9×6 m stall guide

All stall sizes · What stall design costs

Design tips

Stall design tips for construction and interiors exhibitors

  1. Build the stand from your own products, such as flooring, panels and fittings, so it works as a showroom.
  2. Show products installed on mock-up walls and corners, not only on shelves.
  3. Plan the lighting for your finishes: warm and neutral zones show materials honestly.

Check the FSD Expo 2027 (Fire, Safety & Disaster) exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.

Also at Bharat Mandapam

Next on the same floor.

All New Delhi shows

FAQ

Stall questions for this show.

  • FSD Expo 2027 (Fire, Safety & Disaster) runs 10 to 11 Jun 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.

  • At Bharat Mandapam (Pragati Maidan) in New Delhi.

  • A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.

  • Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.

  • About 8 weeks before the show (15 Apr 2027), so there's time for the organiser's approval and for fabrication.

See your stall before anyone builds it

Start designing