Skip to content
14 to 16 Feb 2027ICAR - CIAE Ground, BhopalFood, beverage, agri

Exhibiting at Farm-Tech India 2027? Design your stall here

Farm-Tech India is on 14 to 16 Feb 2027 at ICAR - CIAE Ground, Bhopal. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.

ICAR - CIAE Ground · Illustrative
AISLE6.0 m3.0 mYour stall
Stall size
Open sides
Design a 6 × 3 m stall, 2 open in Boothlane

Road to show day

87 days to doors open. Here’s the climb.

  1. 01 · Today

    Brief

    Set your stall size and open sides.

  2. 02 · +1 min

    Concepts

    Photoreal concepts to compare, in under a minute.

  3. 03 · +2 days

    Client sign-off

    Share a walk-through link for comments.

  4. 04 · By 20 Dec

    To fabricator

    Export renders and OBJ or FBX files.

  5. 05 · 12 to 13 Feb

    Build-up

    Your builder installs at ICAR - CIAE Ground.

  6. 06 · 14 to 16 Feb

    Show days

    Doors open.

Have your design ready by 20 Dec 2026, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.

Example concepts

Three directions for a food and beverage stall, from one brief.

  • 01

    Sampling bar

    6 × 3 m · 2 open

    A long tasting counter on the aisle, with water, power and storage behind it.

  • 02

    Store shelf

    6 × 6 m · 3 open

    Your range on retail-style shelves, the way a buyer sees it in a store.

  • 03

    Distributor lounge

    9 × 6 m · 3 open

    Sampling up front and a seated area for importer meetings at the back.

Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.

The show

Farm-Tech India at a glance

  • Dates14 to 16 Feb 2027
  • VenueICAR - CIAE Ground
  • CityBhopal, India
  • SectorFood, beverage, agri
  • Have your design ready by20 Dec 2026

Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.

About the show

About Farm-Tech India

Farm-Tech India is a food, beverage, agri trade show at ICAR - CIAE Ground, Bhopal. Check the exhibitor profile, floor plan and stall rules in the organiser's exhibitor manual before you design.

Stall sizes

Which stall size to book for Farm-Tech India

Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:

  • 3×3 m stall

    One branded back wall, a counter and a display unit.

    3×3 m stall guide
  • 6×3 m stall

    Adds a demo or product zone next to the counter.

    6×3 m stall guide
  • 6×6 m stall

    Usually open on two or three sides, with a small meeting area and storage.

    6×6 m stall guide
  • 9×6 m stall

    Separate product zones, a meeting room and branding seen from several aisles.

    9×6 m stall guide

All stall sizes · What stall design costs

Design tips

Stall design tips for food and beverage exhibitors

  1. Plan the sampling counter first, with water, power and storage behind it.
  2. Retail-style shelves show your range the way a buyer would see it in a store.
  3. Keep a sit-down area for distributor and importer meetings.
  4. Check the organiser's food handling and sampling rules before you finalise the counter.

Check the Farm-Tech India exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.

FAQ

Stall questions for this show.

  • Farm-Tech India runs 14 to 16 Feb 2027 at ICAR - CIAE Ground, Bhopal. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.

  • At ICAR - CIAE Ground in Bhopal.

  • A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.

  • Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.

  • About 8 weeks before the show (20 Dec 2026), so there's time for the organiser's approval and for fabrication.

See your stall before anyone builds it

Start designing