Skip to content
11 to 13 Feb 2027Bharat Mandapam, New DelhiMulti-sector

Exhibiting at BES Expo 2027? Design your stall here

BES Expo 2027 is on 11 to 13 Feb 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.

Bharat Mandapam · Illustrative
AISLE6.0 m3.0 mYour stall
Stall size
Open sides
Design a 6 × 3 m stall, 2 open in Boothlane

Road to show day

84 days to doors open. Here’s the climb.

  1. 01 · Today

    Brief

    Set your stall size and open sides.

  2. 02 · +1 min

    Concepts

    Photoreal concepts to compare, in under a minute.

  3. 03 · +2 days

    Client sign-off

    Share a walk-through link for comments.

  4. 04 · By 17 Dec

    To fabricator

    Export renders and OBJ or FBX files.

  5. 05 · 9 to 10 Feb

    Build-up

    Your builder installs at Bharat Mandapam.

  6. 06 · 11 to 13 Feb

    Show days

    Doors open.

Have your design ready by 17 Dec 2026, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.

Example concepts

Three directions for a multi-sector stall, from one brief.

  • 01

    Open front

    6 × 3 m · 1 open

    One clear line about what you do, with the counter to one side.

  • 02

    Corner showcase

    6 × 6 m · 2 open

    Your hero product on the corner, where two aisles see it.

  • 03

    Island hub

    9 × 9 m · 4 open

    A central storage core with your brand on every side.

Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.

The show

BES Expo 2027 at a glance

Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.

About the show

About BES Expo 2027

The International Conference and Exhibition on Broadcast and Media Technology, combining an expo with conference sessions; the 2027 theme is Reimagining Media: Intelligent, Innovative and Indigenous.

Who exhibits

Broadcast, OTT, AV, satellite and media technology companies.

Who visits

Broadcast and media technology professionals attending as visitors or conference delegates.

Sources: besindia.com

Stall sizes

Which stall size to book for BES Expo 2027

Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:

  • 3×3 m stall

    One branded back wall, a counter and a display unit.

    3×3 m stall guide
  • 6×3 m stall

    Adds a demo or product zone next to the counter.

    6×3 m stall guide
  • 6×6 m stall

    Usually open on two or three sides, with a small meeting area and storage.

    6×6 m stall guide
  • 9×6 m stall

    Separate product zones, a meeting room and branding seen from several aisles.

    9×6 m stall guide

All stall sizes · What stall design costs

Design tips

Stall design tips for multi-sector exhibitors

  1. Lead with one clear line about what you do. Multi-sector halls are busy and visitors skim.
  2. Keep the entrance open and the counter to one side.
  3. Plan storage for brochures, samples and bags. It always runs out.

Check the BES Expo 2027 exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.

Also at Bharat Mandapam

Next on the same floor.

All New Delhi shows

FAQ

Stall questions for this show.

  • BES Expo 2027 runs 11 to 13 Feb 2027 at Bharat Mandapam (Pragati Maidan), New Delhi. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.

  • At Bharat Mandapam (Pragati Maidan) in New Delhi.

  • A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.

  • Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.

  • About 8 weeks before the show (17 Dec 2026), so there's time for the organiser's approval and for fabrication.

See your stall before anyone builds it

Start designing