Exhibiting at Automation Expo 2027? Design your stall here
Automation Expo 2027 is on 2 to 5 Jun 2027 at Bombay Exhibition Centre (NESCO), Mumbai. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
195 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 7 Apr
To fabricator
Export renders and OBJ or FBX files.
- 05 · 31 May to 1 Jun
Build-up
Your builder installs at Bombay Exhibition Centre.
- 06 · 2 to 5 Jun
Show days
Doors open.
Have your design ready by 7 Apr 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a machinery and industrial stall, from one brief.
-
01
Live machines on a raised platform, with safe space marked by flooring and light.
-
02
Equipment in the round and a raised header that reads above the machines.
-
03
One hero machine up front and a quiet table for talking numbers.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
Automation Expo 2027 at a glance
- Dates2 to 5 Jun 2027
- SectorMachinery, industrial, manufacturing
- Official websiteautomationindiaexpo.com
- Have your design ready by7 Apr 2027
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About Automation Expo 2027
Automation Expo 2027 is a machinery, industrial, manufacturing trade show at Bombay Exhibition Centre (NESCO), Mumbai. Check the exhibitor profile, floor plan and stall rules in the organiser's exhibitor manual before you design.
Stall sizes
Which stall size to book for Automation Expo 2027
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for machinery and industrial exhibitors
- Plan floor loading, power and compressed air for live machines first. Heavy exhibits usually go in before the stand is built around them.
- Mark safe space around running machines with flooring and lighting rather than barriers, so visitors can still get close.
- Put the brand on a raised header or hanging sign so it reads above large equipment.
- Add a quiet meeting corner. Capital equipment buyers want to sit down and talk numbers.
Check the Automation Expo 2027 exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at Bombay Exhibition Centre
Next on the same floor.
FAQ
Stall questions for this show.
Automation Expo 2027 runs 2 to 5 Jun 2027 at Bombay Exhibition Centre (NESCO), Mumbai. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At Bombay Exhibition Centre (NESCO) in Mumbai.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (7 Apr 2027), so there's time for the organiser's approval and for fabrication.
