Exhibiting at Aero India 2027? Design your stall here
Aero India 2027 is on 8 to 12 Feb 2027 at Air Force Station Yelahanka, Bengaluru. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
81 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 14 Dec
To fabricator
Export renders and OBJ or FBX files.
- 05 · 6 to 7 Feb
Build-up
Your builder installs at Air Force Station Yelahanka.
- 06 · 8 to 12 Feb
Show days
Doors open.
Have your design ready by 14 Dec 2026, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for an automotive and transport stall, from one brief.
-
01
The hero vehicle raised on a platform above the crowd.
-
02
Tracking and fleet software on large screens beside the product.
-
03
A seated area for fleet buyers next to one showcase vehicle.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
Aero India 2027 at a glance
- Dates8 to 12 Feb 2027
- SectorAerospace, defence
- OrganiserDepartment of Defence Production
- Edition16th edition
- Official websiteaeroindia.gov.in
- Have your design ready by14 Dec 2026
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About Aero India 2027
Aero India is a five-day aerospace and defence exhibition and air show at Air Force Station Yelahanka, Bengaluru. It combines an exhibition with business and strategic engagements and aerial displays.
Who exhibits
Exhibitors are global aerospace and defence companies and Indian defence industries, including MSMEs and start-ups.
Who visits
Attendees include policymakers, defence ministers, industry CEOs and representatives, technology experts, innovators and defence forces personnel.
Scale: About 900 exhibitors including 150 international, 26 defence ministers and 118 global CEOs (2025 edition, per Swarajya)
Sources: swarajyamag.com
Stall sizes
Which stall size to book for Aero India 2027
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for automotive and transport exhibitors
- Plan vehicle entry early: door widths, turning space and floor load decide where the hero product can go.
- A platform or turntable lifts the hero vehicle above the crowd.
- Use large screens for fleet, tracking or logistics software that can't be shown physically.
Check the Aero India 2027 exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also in Bengaluru
Next in Bengaluru.
FAQ
Stall questions for this show.
Aero India 2027 runs 8 to 12 Feb 2027 at Air Force Station Yelahanka, Bengaluru. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At Air Force Station Yelahanka in Bengaluru.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (14 Dec 2026), so there's time for the organiser's approval and for fabrication.
