Exhibiting at ACREX India 2027? Design your stall here
ACREX India is on 11 to 13 Feb 2027 at India Expo Centre & Mart, Greater Noida. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
84 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 17 Dec
To fabricator
Export renders and OBJ or FBX files.
- 05 · 9 to 10 Feb
Build-up
Your builder installs at India Expo Mart.
- 06 · 11 to 13 Feb
Show days
Doors open.
Have your design ready by 17 Dec 2026, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a construction and interiors stall, from one brief.
-
01
Walls, floor and fittings built from your own products.
-
02
Finishes on full-height mock-up walls, lit warm and neutral.
-
03
A finished room visitors walk into, with samples to hand.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
ACREX India at a glance
- Dates11 to 13 Feb 2027
- CityGreater Noida, India
- SectorConstruction, building, interiors
- OrganiserISHRAE Trade Fairs
- Have your design ready by17 Dec 2026
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About ACREX India
ACREX India is an exhibition on HVAC&R and building automation, organised by ISHRAE Trade Fairs, with 27+ years of history per the organiser. It focuses on energy efficiency, decarbonisation and building technology, with knowledge sessions, demo and innovation zones.
Who exhibits
Exhibitors show chillers, air handling and distribution, room and light commercial air conditioners, refrigeration, water distribution and treatment, indoor air quality products, building automation and controls, and IoT and analytics.
Who visits
Visitors include architects, MEP and HVAC consultants and contractors, engineers, interior designers, facility managers, distributors and importers, purchase managers, OEMs, developers, end users and government agencies.
Scale: 500+ exhibitors, 50,000+ trade visitors and 40+ countries (per organiser; year not stated)
Stall sizes
Which stall size to book for ACREX India
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for construction and interiors exhibitors
- Build the stand from your own products, such as flooring, panels and fittings, so it works as a showroom.
- Show products installed on mock-up walls and corners, not only on shelves.
- Plan the lighting for your finishes: warm and neutral zones show materials honestly.
Check the ACREX India exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at India Expo Mart
Next on the same floor.
FAQ
Stall questions for this show.
ACREX India runs 11 to 13 Feb 2027 at India Expo Centre & Mart, Greater Noida. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At India Expo Centre & Mart in Greater Noida.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (17 Dec 2026), so there's time for the organiser's approval and for fabrication.
