Exhibiting at ACETECH Hyderabad 2027? Design your stall here
ACETECH Hyderabad is on 22 to 24 Jan 2027 at HITEX Exhibition Centre, Hyderabad. Set your stall size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
64 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stall size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 27 Nov
To fabricator
Export renders and OBJ or FBX files.
- 05 · 20 to 21 Jan
Build-up
Your builder installs at HITEX.
- 06 · 22 to 24 Jan
Show days
Doors open.
Have your design ready by 27 Nov 2026, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a machinery and industrial stall, from one brief.
-
01
Live machines on a raised platform, with safe space marked by flooring and light.
-
02
Equipment in the round and a raised header that reads above the machines.
-
03
One hero machine up front and a quiet table for talking numbers.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
ACETECH Hyderabad at a glance
- Dates22 to 24 Jan 2027
- SectorMachinery, industrial, manufacturing
- OrganiserABEC Exhibitions & Conferences Pvt Ltd
- Have your design ready by27 Nov 2026
Dates and venue as listed in venue and organiser calendars. Sources checked do not confirm the 2027 dates; the 2026 edition ran 23 to 25 Jan 2026 at HITEX Exhibition Centre. Confirm with the organiser before you book space or travel.
About the show
About ACETECH Hyderabad
The Hyderabad edition of Economic Times ACETECH, which the organiser calls Asia's largest exhibition on building materials and home interior products; the series was founded in 2006 and also runs in Mumbai, Delhi and Bengaluru.
Who exhibits
Suppliers across 24 categories including bath and sanitation, doors and windows, glass and facades, kitchens, furniture, marble and stone, paints, plumbing, roofing, tiles, wood and flooring, and elevators.
Who visits
Trade visitors only, mainly architects, designers, developers, engineers, contractors and suppliers.
Sources: jetro.go.jp
Stall sizes
Which stall size to book for ACETECH Hyderabad
Indian shows sell space by the square metre, as bare space or as a shell scheme with walls, fascia and lights. These are the sizes exhibitors book most often:
3×3 m stall
One branded back wall, a counter and a display unit.
3×3 m stall guide6×3 m stall
Adds a demo or product zone next to the counter.
6×3 m stall guide6×6 m stall
Usually open on two or three sides, with a small meeting area and storage.
6×6 m stall guide9×6 m stall
Separate product zones, a meeting room and branding seen from several aisles.
9×6 m stall guide
Design tips
Stall design tips for machinery and industrial exhibitors
- Plan floor loading, power and compressed air for live machines first. Heavy exhibits usually go in before the stand is built around them.
- Mark safe space around running machines with flooring and lighting rather than barriers, so visitors can still get close.
- Put the brand on a raised header or hanging sign so it reads above large equipment.
- Add a quiet meeting corner. Capital equipment buyers want to sit down and talk numbers.
Check the ACETECH Hyderabad exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at HITEX
Next on the same floor.
FAQ
Stall questions for this show.
ACETECH Hyderabad runs 22 to 24 Jan 2027 at HITEX Exhibition Centre, Hyderabad. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At HITEX Exhibition Centre in Hyderabad.
A 3×3 m stall fits one branded wall, a counter and a display. Book 6×3 m or more if you need a demo area or a place to sit with buyers, and an island if you want your brand seen from every aisle.
Open Boothlane by EaseMyExpo in your browser, enter your stall size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (27 Nov 2026), so there's time for the organiser's approval and for fabrication.
