Exhibition stall working drawings, explained
Working drawings are the sized drawings a fabricator builds the stall from: plan, elevations, sections, dimensions and materials. In India they typically cost about ₹2,000 for a 3×3 m stall, on top of the design.

What a working drawing set includes
Floor plan
Every element placed and dimensioned.
Elevations
Each open face, with heights.
Sections
Through walls, counters and platforms.
Material and finish list
Board, laminate, paint, vinyl, glass.
Graphics list
Every graphic with its print size.
Electrical layout
Lights, power points, load.
Why they matter
A render shows what the client approves. Working drawings decide what the workshop builds. If the two don't match, the stall on possession day won't match the render - and the client notices.
In India, most custom stalls are built in wood by carpenters, so drawings should use real board sizes and joinery, not cladding details meant for other build systems.
Typical cost
| Stall | India | Abroad |
|---|---|---|
| Small stall (3×3 m) | About ₹2,000 | About $60 |
| Larger stalls | Quoted per project | Quoted per project |
Based on EaseMyExpo's conversations with agencies and freelance designers, October 2026.
FAQ
Good questions, answered.
Sized plans, elevations, sections and material lists that the fabricator uses to build the stall.
About ₹2,000 for a 3×3 m stall, on top of the design fee. Larger stalls are quoted per project.
Usually the stall designer or the fabricator's in-house team.
