10×20 trade show booth design
A 10×20 ft booth is 200 sq ft, about 3×6.1 m. Two 10×10 units side by side. Room for a demo zone and a small meeting area.
What fits in a 10×20 booth
- 20 ft back wall or LED wall
- Reception counter
- Two demo stations
- Small meeting table
- Storage closet
Layouts for this size
- 1 open side
10×20 inline booth
Put one strong message on the 8 ft back wall and keep the front of the booth low and open.
- 2 open sides
10×20 corner booth
Put the counter or hero product at the corner, where both aisles see it, and brand both open faces..
- 3 open sides
10×20 end-cap booth
Centre the back wall and keep the two ends low and open.
Before you design: check height, hanging-sign and line-of-sight limits in your show's exhibitor manual. Most US shows follow similar guidelines — see booth height and line-of-sight rules.
Design it in 3D
- Open Boothlane by EaseMyExpo and enter 10×20 ft and the booth type.
- Draw the back wall, counter and displays — or upload a reference photo of a booth you like.
- Export renders for approval and OBJ/FBX files for your builder.
Design a 10×20 booth
Runs in your browser. Imports from 3ds Max. Exports OBJ & FBX.
Start designingFrequently asked questions
How big is a 10×20 booth?
200 sq ft, about 3×6.1 m.
What can fit in a 10×20 booth?
Typically: 20 ft back wall or LED wall; Reception counter; Two demo stations; Small meeting table; Storage closet.
What booth types come in 10×20?
Inline booth, Corner booth, End-cap booth.