10×20 end-cap booth design
A 10×20 end-cap booth is 200 sq ft with 3 sides open to the aisle. Centre the back wall and keep the two ends low and open. Treat all three faces as entrances.
| Size | 10×20 ft (200 sq ft) |
|---|---|
| Metric | about 3×6.1 m |
| Type | End-cap booth (usually 10×20 ft) |
| Open sides | 3 |
Height and sightline rules
Many shows allow an 8 ft back wall in the center portion only, with lower heights toward the aisles. Check the exhibitor manual. Always confirm in the exhibitor manual.
Layout advice
Centre the back wall and keep the two ends low and open. Treat all three faces as entrances.
Other layouts at this size: Inline booth · Corner booth
Design a 10×20 end-cap booth
Runs in your browser. Imports from 3ds Max. Exports OBJ & FBX.
Start designingFrequently asked questions
What is a end-cap booth?
A booth at the end of an aisle, open on three sides, usually 10×20 ft.
How tall can a 10×20 end-cap booth be?
Many shows allow an 8 ft back wall in the center portion only, with lower heights toward the aisles. Check the exhibitor manual. Check the show's exhibitor manual.
Where should the counter go in a 10×20 end-cap booth?
Centre the back wall and keep the two ends low and open. Treat all three faces as entrances.