Skip to content
23 to 27 Jan 2027Rimini Fiera, RiminiFood, beverage, agri

Exhibiting at SIGEP 2027? Design your stand here

SIGEP is on 23 to 27 Jan 2027 at Rimini Fiera, Rimini, Italy. Set your stand size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.

Rimini Fiera · Illustrative
AISLE6.0 m3.0 mYour stand
Stand size
Open sides
Design a 6 × 3 m stand, 2 open in Boothlane

Road to show day

65 days to doors open. Here’s the climb.

  1. 01 · Today

    Brief

    Set your stand size and open sides.

  2. 02 · +1 min

    Concepts

    Photoreal concepts to compare, in under a minute.

  3. 03 · +2 days

    Client sign-off

    Share a walk-through link for comments.

  4. 04 · By 28 Nov

    To fabricator

    Export renders and OBJ or FBX files.

  5. 05 · 21 to 22 Jan

    Build-up

    Your builder installs at Rimini Fiera.

  6. 06 · 23 to 27 Jan

    Show days

    Doors open.

Have your design ready by 28 Nov 2026, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.

Example concepts

Three directions for a food and beverage stand, from one brief.

  • 01

    Sampling bar

    6 × 3 m · 2 open

    A long tasting counter on the aisle, with water, power and storage behind it.

  • 02

    Store shelf

    6 × 6 m · 3 open

    Your range on retail-style shelves, the way a buyer sees it in a store.

  • 03

    Distributor lounge

    9 × 6 m · 3 open

    Sampling up front and a seated area for importer meetings at the back.

Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.

The show

SIGEP at a glance

  • Dates23 to 27 Jan 2027
  • SectorFood, beverage, agri
  • Have your design ready by28 Nov 2026

Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.

About the show

About SIGEP

SIGEP is a food, beverage, agri trade show at Rimini Fiera, Rimini, Italy. Check the exhibitor profile, floor plan and stand rules in the organiser's exhibitor manual before you design.

Stand sizes

Which stand size to book for SIGEP

Space is sold per square metre, either as a shell scheme (walls, fascia and lights supplied) or as space only for a custom-built stand. Common sizes:

  • 3×3 m stand

    One graphic wall, a counter and a display. The usual shell scheme size.

    3×3 m stand guide
  • 6×3 m stand

    Room for a demo zone or a small meeting table.

    6×3 m stand guide
  • 6×6 m stand

    Often a corner or peninsula, with meeting space and storage.

    6×6 m stand guide
  • 9×6 m stand

    A custom space-only stand with zones, a meeting room and a raised header.

    9×6 m stand guide

All stand sizes · Shell scheme or space only?

Design tips

Stand design tips for food and beverage exhibitors

  1. Plan the sampling counter first, with water, power and storage behind it.
  2. Retail-style shelves show your range the way a buyer would see it in a store.
  3. Keep a sit-down area for distributor and importer meetings.
  4. Check the organiser's food handling and sampling rules before you finalise the counter.

Check the SIGEP exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.

Also at Rimini Fiera

Next on the same floor.

All Rimini shows

FAQ

Stand questions for this show.

  • SIGEP runs 23 to 27 Jan 2027 at Rimini Fiera, Rimini, Italy. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.

  • At Rimini Fiera in Rimini, Italy.

  • A 3×3 m shell scheme suits a first show or a small range. Choose 6×3 m or larger for demos and meetings, and space only (no shell scheme) if you want a custom-built stand.

  • Open Boothlane by EaseMyExpo in your browser, enter your stand size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.

  • About 8 weeks before the show (28 Nov 2026), so there's time for the organiser's approval and for fabrication.

See your stand before anyone builds it

Start designing