Exhibiting at Lamiera 2027? Design your stand here
Lamiera is on 11 to 14 May 2027 at Fiera Milano, Rho, Milan, Italy. Set your stand size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
173 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stand size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 16 Mar
To fabricator
Export renders and OBJ or FBX files.
- 05 · 9 to 10 May
Build-up
Your builder installs at Fiera Milano, Rho.
- 06 · 11 to 14 May
Show days
Doors open.
Have your design ready by 16 Mar 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a machinery and industrial stand, from one brief.
-
01
Live machines on a raised platform, with safe space marked by flooring and light.
-
02
Equipment in the round and a raised header that reads above the machines.
-
03
One hero machine up front and a quiet table for talking numbers.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
Lamiera at a glance
- Dates11 to 14 May 2027
- VenueFiera Milano, Rho
- SectorMachinery, industrial, manufacturing
- Have your design ready by16 Mar 2027
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About Lamiera
Lamiera is a machinery, industrial, manufacturing trade show at Fiera Milano, Rho, Milan, Italy. Check the exhibitor profile, floor plan and stand rules in the organiser's exhibitor manual before you design.
Stand sizes
Which stand size to book for Lamiera
Space is sold per square metre, either as a shell scheme (walls, fascia and lights supplied) or as space only for a custom-built stand. Common sizes:
3×3 m stand
One graphic wall, a counter and a display. The usual shell scheme size.
3×3 m stand guide6×3 m stand
Room for a demo zone or a small meeting table.
6×3 m stand guide6×6 m stand
Often a corner or peninsula, with meeting space and storage.
6×6 m stand guide9×6 m stand
A custom space-only stand with zones, a meeting room and a raised header.
9×6 m stand guide
Design tips
Stand design tips for machinery and industrial exhibitors
- Plan floor loading, power and compressed air for live machines first. Heavy exhibits usually go in before the stand is built around them.
- Mark safe space around running machines with flooring and lighting rather than barriers, so visitors can still get close.
- Put the brand on a raised header or hanging sign so it reads above large equipment.
- Add a quiet meeting corner. Capital equipment buyers want to sit down and talk numbers.
Check the Lamiera exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at Fiera Milano, Rho
Next on the same floor.
FAQ
Stand questions for this show.
Lamiera runs 11 to 14 May 2027 at Fiera Milano, Rho, Milan, Italy. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At Fiera Milano, Rho in Milan, Italy.
A 3×3 m shell scheme suits a first show or a small range. Choose 6×3 m or larger for demos and meetings, and space only (no shell scheme) if you want a custom-built stand.
Open Boothlane by EaseMyExpo in your browser, enter your stand size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (16 Mar 2027), so there's time for the organiser's approval and for fabrication.
