Exhibiting at Hispack 2027? Design your stand here
Hispack is on 4 to 7 May 2027 at Fira de Barcelona - Recinto Gran Via, Barcelona, Spain. Set your stand size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
166 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stand size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 9 Mar
To fabricator
Export renders and OBJ or FBX files.
- 05 · 2 to 3 May
Build-up
Your builder installs at Fira de Barcelona - Recinto Gran Via.
- 06 · 4 to 7 May
Show days
Doors open.
Have your design ready by 9 Mar 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for a packaging and printing stand, from one brief.
-
01
Finished packs on shelves at hand height, not just materials.
-
02
A running machine with safe space and power planned around it.
-
03
Samples to pick up on the corner, a table for orders behind.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
Hispack at a glance
- Dates4 to 7 May 2027
- SectorPackaging, printing, paper
- Have your design ready by9 Mar 2027
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About Hispack
Hispack is a packaging, printing, paper trade show at Fira de Barcelona - Recinto Gran Via, Barcelona, Spain. Check the exhibitor profile, floor plan and stand rules in the organiser's exhibitor manual before you design.
Stand sizes
Which stand size to book for Hispack
Space is sold per square metre, either as a shell scheme (walls, fascia and lights supplied) or as space only for a custom-built stand. Common sizes:
3×3 m stand
One graphic wall, a counter and a display. The usual shell scheme size.
3×3 m stand guide6×3 m stand
Room for a demo zone or a small meeting table.
6×3 m stand guide6×6 m stand
Often a corner or peninsula, with meeting space and storage.
6×6 m stand guide9×6 m stand
A custom space-only stand with zones, a meeting room and a raised header.
9×6 m stand guide
Design tips
Stand design tips for packaging and printing exhibitors
- Show finished packs, not just materials. Buyers want to see the end result.
- If machines run live, plan power, noise and safety space around them.
- Put samples on shelves at hand height so visitors pick them up.
Check the Hispack exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also at Fira de Barcelona - Recinto Gran Via
Next on the same floor.
FAQ
Stand questions for this show.
Hispack runs 4 to 7 May 2027 at Fira de Barcelona - Recinto Gran Via, Barcelona, Spain. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At Fira de Barcelona - Recinto Gran Via in Barcelona, Spain.
A 3×3 m shell scheme suits a first show or a small range. Choose 6×3 m or larger for demos and meetings, and space only (no shell scheme) if you want a custom-built stand.
Open Boothlane by EaseMyExpo in your browser, enter your stand size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (9 Mar 2027), so there's time for the organiser's approval and for fabrication.
