Exhibiting at Autopromotec 2027? Design your stand here
Autopromotec is on 26 to 29 May 2027 at Bologna Exhibition Centre, Bologna, Italy. Set your stand size and open sides on the plan, then design it in Boothlane by EaseMyExpo: add your brand and get a photorealistic render in under 60 seconds, all in your browser.
Road to show day
188 days to doors open. Here’s the climb.
- 01 · Today
Brief
Set your stand size and open sides.
- 02 · +1 min
Concepts
Photoreal concepts to compare, in under a minute.
- 03 · +2 days
Client sign-off
Share a walk-through link for comments.
- 04 · By 31 Mar
To fabricator
Export renders and OBJ or FBX files.
- 05 · 24 to 25 May
Build-up
Your builder installs at Bologna Exhibition Centre.
- 06 · 26 to 29 May
Show days
Doors open.
Have your design ready by 31 Mar 2027, about eight weeks before doors open, so the organiser can approve it and your builder has time to fabricate. Build-up dates are typical; your exhibitor manual has the exact ones.
Example concepts
Three directions for an automotive and transport stand, from one brief.
-
01
The hero vehicle raised on a platform above the crowd.
-
02
Tracking and fleet software on large screens beside the product.
-
03
A seated area for fleet buyers next to one showcase vehicle.
Illustrative layouts. Your concepts come from your own brief in Boothlane by EaseMyExpo.
The show
Autopromotec at a glance
- Dates26 to 29 May 2027
- SectorAutomotive, transport, logistics
- Have your design ready by31 Mar 2027
Dates and venue as listed in venue and organiser calendars. Confirm with the organiser before you book space or travel.
About the show
About Autopromotec
Autopromotec is a automotive, transport, logistics trade show at Bologna Exhibition Centre, Bologna, Italy. Check the exhibitor profile, floor plan and stand rules in the organiser's exhibitor manual before you design.
Stand sizes
Which stand size to book for Autopromotec
Space is sold per square metre, either as a shell scheme (walls, fascia and lights supplied) or as space only for a custom-built stand. Common sizes:
3×3 m stand
One graphic wall, a counter and a display. The usual shell scheme size.
3×3 m stand guide6×3 m stand
Room for a demo zone or a small meeting table.
6×3 m stand guide6×6 m stand
Often a corner or peninsula, with meeting space and storage.
6×6 m stand guide9×6 m stand
A custom space-only stand with zones, a meeting room and a raised header.
9×6 m stand guide
Design tips
Stand design tips for automotive and transport exhibitors
- Plan vehicle entry early: door widths, turning space and floor load decide where the hero product can go.
- A platform or turntable lifts the hero vehicle above the crowd.
- Use large screens for fleet, tracking or logistics software that can't be shown physically.
Check the Autopromotec exhibitor manual for height limits, rigging, power and fire rules before you finalise the design.
Also in Bologna
Next in Bologna.
FAQ
Stand questions for this show.
Autopromotec runs 26 to 29 May 2027 at Bologna Exhibition Centre, Bologna, Italy. Dates are as listed by the venue and organiser, so confirm with the organiser before you book.
At Bologna Exhibition Centre in Bologna, Italy.
A 3×3 m shell scheme suits a first show or a small range. Choose 6×3 m or larger for demos and meetings, and space only (no shell scheme) if you want a custom-built stand.
Open Boothlane by EaseMyExpo in your browser, enter your stand size and open sides, then add walls, fascia, furniture, lighting and your graphics. You get a photorealistic render in under 60 seconds to share with your team or your fabricator.
About 8 weeks before the show (31 Mar 2027), so there's time for the organiser's approval and for fabrication.
